objectionable interference - перевод на русский
Diclib.com
Словарь ChatGPT
Введите слово или словосочетание на любом языке 👆
Язык:

Перевод и анализ слов искусственным интеллектом ChatGPT

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

  • как употребляется слово
  • частота употребления
  • используется оно чаще в устной или письменной речи
  • варианты перевода слова
  • примеры употребления (несколько фраз с переводом)
  • этимология

objectionable interference - перевод на русский

WHEN TWO WAVES SUPERPOSE TO FORM A NEW WAVE
Interference pattern; Constructive interference; Phase cancellation; Constructive Interference; Interference Pattern; Interference (wave motion); Interference fringe; Destructive interference; Quantum Interference; Destructive Interference; Interference Fringe; Interference of waves; Quantum interference; Interferogram; Antisound; Optical interference; Interference (Physics); Interference (physics); Light interference; Interference (optics); Interference pattern (disambiguation); Interference (light); Complete Destructive interference; Interference (wave propagation)
  • Cropped tomography scan animation of laser light interference passing through two pinholes (side edges).
  • A magnified image of a coloured interference pattern in a soap film. The "black holes" are areas of almost total destructive interference (antiphase).
  • alt=When two or more waves travel through a medium and superpose then the resultant intensity do not distributed uniformly in the space. At some places, it is maximum while at some other places it is minimum. This non uniform distribution of intensity or energy of light is known as interference.
  • Interference fringes in overlapping plane waves
  • Creation of interference fringes by an [[optical flat]] on a reflective surface.  Light rays from a monochromatic source pass through the glass and reflect off both the bottom surface of the flat and the supporting surface.   The tiny gap between the surfaces means the two reflected rays have different path lengths. In addition the ray reflected from the bottom plate undergoes a 180° phase reversal.  As a result, at locations '''''(a)''''' where the path difference is an odd multiple of λ/2, the waves reinforce.   At locations '''''(b)''''' where the path difference is an even multiple of λ/2 the waves cancel.  Since the gap between the surfaces varies slightly in width at different points, a series of alternating bright and dark bands, ''interference fringes'', are seen.
  • White light interference in a [[soap bubble]]. The [[iridescence]] is due to [[thin-film interference]].
  • Interference of waves from two point sources.
  • interferometric array]] formed from many smaller [[telescope]]s, like many larger [[radio telescope]]s.
  • Interference of right traveling (green) and left traveling (blue) waves in Two-dimensional space, resulting in final (red) wave

objectionable interference      

общая лексика

недопустимые помехи

constructive interference         

оптика

конструктивная интерференция

interferogram         

[intə'fi(ə)rəgræm]

общая лексика

интерферограмма

существительное

физика

интерферограмма

записанная интерференционная картина

Определение

Radio Frequency Interference
<hardware, testing> (RFI) Electromagnetic radiation which is emitted by electrical circuits carrying rapidly changing signals, as a by-product of their normal operation, and which causes unwanted signals (interference or noise) to be induced in other circuits. The most important means of reducing RFI are: use of bypass or "decoupling" capacitors on each active device (connected across the power supply, as close to the device as possible), risetime control of high speed signals using series resistors and VCC filtering. Shielding is usually a last resort after other techniques have failed because of the added expense of RF gaskets and the like. The efficiency of the radiation is dependant on the height above the ground or power plane (at RF one is as good as the other) and the length of the conductor in relationship to the wavelength of the signal component (fundamental, harmonic or transient (overshoot, undershoot or ringing)). At lower frequencies, such as 133 MHz, radiation is almost exclusively via I/O cables; RF noise gets onto the power planes and is coupled to the line drivers via the VCC and ground pins. The Rf is then coupled to the cable through the line driver as common node noise. Since the noise is common mode, shielding has very little effect, even with differential pairs. The RF energy is capacitively coupled from the signal pair to the shield and the shield itself does the radiating. At higher frequencies, usually above 500 Mhz, traces get electrically longer and higher above the plane. Two techniques are used at these frequencies: wave shaping with series resistors and embedding the traces between the two planes. If all these measures still leave too much RFI, sheilding such as RF gaskets and copper tape can be used. Most digital equipment is designed with metal, or coated plastic, cases. Switching power supplies can be a source of RFI, but have become less of a problem as design techniques have improved. Most countries have legal requirements that electronic and electrical hardware must still work correctly when subjected to certain amounts of RFI, and should not emit RFI which could interfere with other equipment (such as radios). See also Electrostatic Discharge, {Electromagnetic Compatibility}. (1998-01-26)

Википедия

Wave interference

In physics, interference is a phenomenon in which two coherent waves are combined by adding their intensities or displacements with due consideration for their phase difference. The resultant wave may have greater intensity (constructive interference) or lower amplitude (destructive interference) if the two waves are in phase or out of phase, respectively. Interference effects can be observed with all types of waves, for example, light, radio, acoustic, surface water waves, gravity waves, or matter waves as well as in loudspeakers as electrical waves.

Как переводится objectionable interference на Русский язык